Customize HookOS for EKS Anywhere on Bare Metal

Customizing HookOS for EKS Anywhere on Bare Metal

To initially network boot bare metal machines used in EKS Anywhere clusters, Tinkerbell acquires a kernel and initial ramdisk that is referred to as the HookOS. A default HookOS is provided when you create an EKS Anywhere cluster. However, there may be cases where you want to override the default HookOS, such as to add drivers required to boot your particular type of hardware.

The following procedure describes how to get the Tinkerbell stack’s Hook/Linuxkit OS built locally. For more information on Tinkerbell’s Hook Installation Environment, see the Tinkerbell Hook repo .

Clone the hook repo or your fork of that repo:

git clone https://github.com/tinkerbell/hook.git
cd hook/

Pull down the commit that EKS Anywhere is tracking for Hook:
```
git checkout -b <new-branch> 03a67729d895635fe3c612e4feca3400b9336cc9
```
NOTE: This commit number can be obtained from the EKS-A build tooling repo .

Make changes shown in the following diff in the Makefile located in the root of the repo using your favorite editor.

diff --git a/Makefile b/Makefile
index e7fd844..8e87c78 100644
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
 ### !!NOTE!!
 # If this is changed then a fresh output dir is required (`git clean -fxd` or just `rm -rf out`)
 # Handling this better shows some of make's suckiness compared to newer build tools (redo, tup ...) where the command lines to tools invoked isn't tracked by make
-ORG := quay.io/tinkerbell
+ORG := localhost:5000/tinkerbell
 # makes sure there's no trailing / so we can just add them in the recipes which looks nicer
 ORG := $(shell echo "${ORG}" | sed 's|/*$$||')

Changes above change the ORG variable to use a local registry (localhost:5000)

Make changes shown in the following diff in the rules.mk located in the root of the repo using your favorite editor.

diff --git a/rules.mk b/rules.mk
index b2c5133..64e32b1 100644
--- a/rules.mk
+++ b/rules.mk
@@ -22,7 +22,7 @@ ifeq ($(ARCH),aarch64)
 ARCH = arm64
 endif

-arches := amd64 arm64
+arches := amd64
 modes := rel dbg

 hook-bootkit-deps := $(wildcard hook-bootkit/*)
@@ -87,13 +87,12 @@ push-hook-bootkit push-hook-docker:
        docker buildx build --platform $$platforms --push -t $(ORG)/$(container):$T $(container)

 .PHONY: dist
-dist: out/$T/rel/amd64/hook.tar out/$T/rel/arm64/hook.tar ## Build tarballs for distribution
+dist: out/$T/rel/amd64/hook.tar ## Build tarballs for distribution
 dbg-dist: out/$T/dbg/$(ARCH)/hook.tar ## Build debug enabled tarball
 dist dbg-dist:
        for f in $^; do
        case $$f in
        *amd64*) arch=x86_64 ;;
 -      *arm64*) arch=aarch64 ;;
        *) echo unknown arch && exit 1;;
        esac
        d=$$(dirname $$(dirname $$f))

Above changes are for the docker build command to only build for the immediately required platform (amd64 in this case) to save time.

Modify the hook.yaml file located in the root of the repo with the following changes:

diff --git a/hook.yaml b/hook.yaml

 index 0c5d789..b51b35e 100644

 net: host
--- a/hook.yaml
+++ b/hook.yaml
@@ -1,5 +1,5 @@
 kernel:
- image: quay.io/tinkerbell/hook-kernel:5.10.85 (http://quay.io/tinkerbell/hook-kernel:5.10.85)
+ image: localhost:5000/tinkerbell/hook-kernel:5.10.85
 cmdline: "console=tty0 console=ttyS0 console=ttyAMA0 console=ttysclp0"
 init:
 - linuxkit/init:v0.8
@@ -42,7 +42,7 @@ services:
 binds:
 - /var/run:/var/run
 - name: docker
- image: quay.io/tinkerbell/hook-docker:0.0 (http://quay.io/tinkerbell/hook-docker:0.0)
+ image: localhost:5000/tinkerbell/hook-docker:0.0
 capabilities:
 - all
 net: host
@@ -64,7 +64,7 @@ services:
 - /var/run/docker
 - /var/run/worker
 - name: bootkit
- image: quay.io/tinkerbell/hook-bootkit:0.0 (http://quay.io/tinkerbell/hook-bootkit:0.0)
+ image: localhost:5000/tinkerbell/hook-bootkit:0.0
 capabilities:
 - all

The changes above are for using local registry (localhost:5000) for hook-docker, hook-bootkit, and hook-kernel.

NOTE: You may also need to modify the hook.yaml file if you want to add or change components that are used to build up the image. So far, for example, we have needed to change versions of init and getty and inject SSH keys. Take a look at the LinuxKit Examples site for examples.

Make any planned custom modifications to the files under hook, if you are only making changes to bootkit or tink-docker.
If you are modifying the kernel, such as to change kernel config parameters to add or modify drivers, follow these steps:
- Change into kernel directory and make a local image for amd64 architecture:
```
cd kernel; make kconfig_amd64
```
- Run the image
```
docker run --rm -ti -v $(pwd):/src:z quay.io/tinkerbell/kconfig
```
- You can now navigate to the source code and run the UI for configuring the kernel:
```
cd linux-5-10
make menuconfig
```
- Once you have changed the necessary kernel configuration parameters, copy the new configuration:
```
cp .config /src/config-5.10.x-x86_64
```
Exit out of container into the repo’s kernel directory and run make:
```
/linux-5.10.85 # exit
user1 % make
```
Install Linuxkit based on instructions from the LinuxKit page.

Ensure that the linuxkit tool is in your PATH:

export PATH=$PATH:/home/tink/linuxkit/bin

Start a local registry:

docker run -d -p 5000:5000 -—name registry registry:2

Compile by running the following in the root of the repo:
```
make dist  
```

Artifacts will be put under the dist directory in the repo’s root:

./initramfs-aarch64
./initramfs-x86_64
./vmlinuz-aarch64
./vmlinuz-x86_64

To use the kernel (vmlinuz) and initial ram disk (initramfs) when you build your cluster, see the description of the hookImagesURLPath field in your Bare Metal configuration file.